Setting Up a Brand New Shower Fixture: A Complete Guide

More Details

Each person maintains their own individual way of thinking when it comes to Simple ways to Install a Shower Cubicle on Your Own.


How to Install a Direct-to-Stud Shower Enclosure
An effective shower installation calls for mindful planning as well as a great deal of job. In most cases, you will require to do 3 types of jobs: mounting wall surfaces, setting up the plumbing, and also finishing walls.

Prep work


To start with, you must decide on the type of shower that you want to mount. It is very important to identify whether the picked shower can managing certain systems and can control a safe level of water through the boiler. The majority of shower units nowadays are developed to be adaptable to various water stress (such as kept warm water and chilly keys).
It is additionally important to think about the water pressure and the preparation of the piping and also water drainage for the shower

Various Types of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower unit can be linked to the bathroom faucet based on your requirement, and also the water temperature can be changed through the faucets. Push-on mixers are cheap and also exceptionally simple to install. However, although the hose connection is easy, it is conveniently dislodged. Additionally, it is bothersome to adjust the temperature.

  • Bath/Shower Mixer: The pipe as well as spray of this kind of shower are combined with a bathroom mixer tap, and the temperature can be changed via the bathroom faucets. It is an extremely inexpensive alternative and also no additional plumbing is included. However, the bath/shower mixers also experience troublesome temperature level control options.

  • Guidebook Mixer: The hose and spray of a manual mixer shower device belong of the wall unit and also the cold and hot water supplies are attached to a solitary valve The temperature level as well as pressure of the water are managed with either one or a variety of handles (in extra pricey showers). Although temperature control is a lot easier in hands-on mixer types, they are extra costly than the previously pointed out mixers. They likewise require extra plumbing of cold and hot supply of water pipes.

  • Thermostatic Mixer: The hose pipe and spray of this shower type belong of the wall surface system as well as the cold and hot water supplies are attached to a single valve right here also. It is full with a built-in stabiliser to self-adjust the water temperature and to avoid it from ending up being too warm. One of the biggest benefits of a thermostatic mixer shower type consists of convenient temperature level control. Nevertheless, it is one of the most expensive of the various mixer options.

  • Power Shower: A power shower is a single unit having an effective electrical pump that is capable of modifying both the water stress as well as temperature. This kind of shower can be fitted if there is water supply from a cold water cistern and also a warm water cylinder. A power shower makes the change of both pressure and also temperature simple. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply and it heats up the water electrically. It is very important to note that for this shower type to be mounted, the mains pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level and also pressure to be readjusted using a knob. Versions with temperature stabilisers are much better as they remain unaffected by various other faucets in other places being used within the household. A significant disadvantage of electrical showers is that the control handle only permits the option of high temperatures at much less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter season when the spray is typically weak and the mains water is cooler. Nevertheless, this trouble is tackled in some designs which are readily available with a winter/summer setup.


  • Approach


    Relying on the kind of shower you wish to install, the shower head must either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it needs to have a check shutoff.
    Prior to starting, it is suggested to note the placements of the shower head as well as control, as well as to prepare the pipe-work included. Furthermore, the water drainage system to get rid of the drainage will require to be intended. Both settings of the cable television route and also the shower switch will also require to be considered if an instant or electric shower unit is being installed.
    Use the instruction guide provided with the shower system to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is necessary to cut off the water. In order to shield the pipelines, they ought to be given a waterproof covering as well as additionally fitted with isolating shutoffs. The pipelines can then be buried right into the wall surface as well as plastered over to neaten the overall look.
    Fit the base tray, shower head, as well as installations.
    Link the major shower control to the pipes that will certainly be supplying the water (This might require a women screw string adapter).
    Reconnect the water supply as well as examination the pipelines for any type of leaks, as some might require tightening.
    If you are mounting an electric shower, bear in mind to turn off the electricity supply prior to making any kind of electrical links. As soon as these links have been made (there need to be guidance within the instruction manual), the power supply can be switched over back on.

    Changing Water Pressure to Suit Your Shower


    The cold water reservoir can be lifted to a higher height (in some cases as low as 150mm (6inches)) by fitting a strong wooden assistance underneath it - perhaps composed of struts as well as blockboards. If you select this choice, the main as well as circulation pipelines will certainly additionally need to be increased to satisfy the brand-new elevation of the storage tank.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be linked into the power supply in order to operate.

    Piping and Water drainage


    It is best to make use of 15mm diameter supply pipes, and also make the runs to the shower as brief as well as straight as feasible so regarding maintain optimal stress and also reduce heat loss. In addition, by minimising using elbows for pipe edges, you can reduce the resistance in the circulation of the water. You can attain this by flexing the pipes instead.

    The Majority Of Usual Errors


  • Going against or ignoring local code restrictions.

  • Utilizing pipelines that are also little.

  • Attaching copper to galvanized without utilizing a brass or dielectric suitable between both.

  • Not utilizing tape or pipe compound at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not setting up an air gap loading for components.

  • Cutting supply stub outs too brief to mount the shutoff valves onto after the ended up wall is in place.

  • Not properly aligning tubing right into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes is at an angle will cause a leak.).

  • When turning the water back on in your home, constantly run the outdoors hose pipe valve or purge your toilets to bleed dust and also air from the lines. This particles can create troubles in your sink taps as well as other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    I stumbled upon that piece of writing on How to Install a Freestand while surfing the web. Are you aware of somebody who is truly interested in Simple ways to Install a Shower Cubicle on Your Own? Do not hesitate to promote it. I cherish reading our article about Simple ways to Install a Shower Cubicle on Your Own.


    Schedule An Appointment

    Leave a Reply

    Your email address will not be published. Required fields are marked *